Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
hardness | H358/30 | ISO 2039/1 | 90 | Mpa |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | 50mm/min,Yield | ISO 527 | 7.5 | % |
Tensile Elongation?(Break) | 50mm/min,Break | ISO 527 | 60 | % |
Tensile Modulus | 1mm/min | ISO 527 | 2100 | Mpa |
Tensile Strength | 50mm/min,Yield | ISO 527 | 55 | Mpa |
Tensile Strength | 50mm/min,Break | ISO 527 | 55 | Mpa |
Flexural Modulus | 2mm/min | ISO 178 | 2000 | Mpa |
Flexural Strength | 2mm/min | ISO 178 | 80 | Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/2C | 30 | KJ/m |
Izod Impact Strength | 23℃ 有Notched | ISO 180/1A | 30 | KJ/m |
Izod Impact Strength | -30℃ 有Notched | ISO 180/1A | 15 | KJ/m |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Linear Thermal Expansion | | DIN 53752 | 9E-05 | 1/℃ |
Thermal Conductivity | | DIN 52612 | 0.23 | W/m℃ |
Deflection Temperature Under Load | A/50 | ISO 306 | 245 | °C |
Deflection Temperature Under Load | B/50 | ISO 306 | 190 | °C |
Deflection Temperature Under Load | B/120 | ISO 306 | 195 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor | 50Hz | IEC 250 | 0.0720 | |
Dissipation Factor | 1MHz | IEC 250 | 0.0240 | |
Dielectric Strength | | IEC 243 | 20.0 | KV/mm |
Other | Test Condition | Test Method | Test Result | Unit |
---|
Oxygen Index | | ISO 4589 | 21 | % |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ISO 1183 | 1.09 | g/cm |
Moisture Absorption | | DIN 53495 | 3.50 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.