Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 250°C/10.0kg | ASTMD1238 | 16 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
fracture | | CCP METHOD | 23.0 | Mpa |
fracture | | ISO527-2/50 | 16.0 | Mpa |
fracture | | CCP METHOD | 310 | % |
fracture | | ISO527-2/50 | 250 | % |
Break | | ASTMD638 | 260 | % |
Break | | ASTMD638 | 16.0 | Mpa |
Break,136°C | | CCP METHOD | 22.0 | Mpa |
Break,136°C | | CCP METHOD | 250 | % |
100mm Span | | ASTMD790 | 65.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
HeatDeformation6 | 121°C | CCP METHOD | 5.0 | % |
Brittleness Temperature | | ASTMD746 | <-40.0 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor? | 1MHz | ASTMD150 | 7E-03 | |
Dielectric Strength | 2.00mm,in Oil | IEC60243-1 | 25 | KV/mm |
Dielectric Constant | 1MHz | ASTMD150 | 2.40 | |
Volume Resistivity | | ASTMD257 | 1.9E+16 | ohms·cm |
Comparative Tracking Index | | IEC60112 | 600 | V |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore A,30sec | ASTMD2240 | 85 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Glow Wire Flammability Index | 3.00mm | IEC60695-2-12 | 850 | °C |
Oxygen Index | | ISO4589-2 | 27 | % |
VW-1 | | CCP METHOD | Pass | |
Glow Wire Ignition Temperature | 3.00mm | IEC60695-2-13 | 825 | °C |
Smoke Density | Flame,0.5mmplaque,Ds,max | ASTME662 | 110 | |
Smoke Density | Non-Flame,0.5mmplaque,Ds,max | ASTME662 | 47 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.