PPO NORYL™ V0150B SABIC INNOVATIVE NANSHA

Unit Price:
$4722 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
30MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：--2	内部方法	0.50to0.70	%
Modeling Shrinkage	Modeling Shrinkage	MD：3.20mm	内部方法	0.50to0.70	%
Moisture Absorption	Saturation,23°C	ISO62	0.18	%
Moisture Absorption	Moisture Absorption	Equilibrium,23°C,50%RH	ISO62	0.060	%
Melt Mass-Flow Rate	280°C/5.0kg	ASTMD1238	3.5	g/10min
Melt Volume flow Rate	300°C/5.0kg	ISO1133	10.0	cm3/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Taber Abrasion Resistance	1000Cycles,1000g,CS-17Wheel	内部方法	35.0	mg
Tensile Stress	Yield	ISO527-2/50	70.0	Mpa
Tensile Stress	Tensile Stress	Break	ISO527-2/50	55.0	Mpa
Tensile Strain	Yield	ISO527-2/50	4.0	%
Tensile Strain	Tensile Strain	Break	ISO527-2/50	10	%
Tensile Modulus		ISO527-2/1	2500	Mpa
Tensile Elongation	Break	ASTMD638	7.0	%
Tensile Elongation	Tensile Elongation	Yield	ASTMD638	5.0	%
Flexural Modulus	50.0mmSpan	ASTMD790	2550	Mpa
Flexural Strength	Yield,50.0mmSpan	ASTMD790	105	Mpa
Tensile Strength	Yield	ASTMD638	70.0	Mpa
Flexural Strength		ISO178	110	Mpa
Tensile Modulus		ASTMD638	2500	Mpa
Tensile Strength	Break	ASTMD638	60.0	Mpa
Flexural Modulus		ISO178	2400	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Heat Deflection Temperature	1.8MPa,Unannealed,100mmSpan	ISO75-2/Ae	130	°C
Heat Deflection Temperature	Heat Deflection Temperature	0.45MPa,Unannealed,100mmSpan	ISO75-2/Be	140	°C
Deflection Temperature Under Load?	1.8MPa,Unannealed,3.20mm	ASTMD648	135	°C
Vicat Softening Temperature		ASTMD152511	155	°C
	Vicat Softening Temperature	--	ISO306/A50	160	°C
		Vicat Softening Temperature	--	ISO306/B50	145	°C
		Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B120	155	°C
RTIElec		UL746	110	°C
Evolution Calendar intelligent importer		UL746	105	°C
RTIStr		UL746	115	°C
Linear thermal expansion coefficient	MD：-40to40°C	ASTME831	7.5E-05	cm/cm/°C
	Linear thermal expansion coefficient	MD：23to80°C	ISO11359-2	7E-05	cm/cm/°C
		Linear thermal expansion coefficient	TD：-40to40°C	ASTME831	7.5E-05	cm/cm/°C
		Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：23to80°C	ISO11359-2	9E-05	cm/cm/°C
Thermal Conductivity		ISO8302	0.27	W/m/K
Ball PressureTest	125°C	IEC60695-10-2	Pass
Ball PressureTest	Ball PressureTest	140°C12	IEC60695-10-2	Pass

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength	0.800mm,in Oil	IEC60243-1	33	KV/mm
	Dielectric Strength	1.60mm,in Oil	IEC60243-1	26	KV/mm
	Dielectric Strength	Dielectric Strength	3.20mm,in Oil	IEC60243-1	16	KV/mm
Relative Permittivity	50Hz	IEC60250	2.80
	Relative Permittivity	60Hz	IEC60250	2.80
	Relative Permittivity	Relative Permittivity	1MHz	IEC60250	2.70
Comparative Tracking Index		IEC60112	250	V
Dissipation Factor?	50Hz	IEC60250	9E-04
	Dissipation Factor?	60Hz	IEC60250	9E-04
	Dissipation Factor?	Dissipation Factor?	1MHz	IEC60250	3E-03
Surface Resistivity		IEC60093	>1.0E+15	ohms
Volume Resistivity		IEC60093	1E+15	ohms·cm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Instrumented Dart Impact	23°C,TotalEnergy	ASTMD3763	50.0	J
Notched Izod Impact Strength	-30°C	ISO180/1A	5.0	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ISO180/1A	13	kJ/m²
Charpy Notched Impact Strength	-30°C	ISO179/1eA	5.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO179/1eA	14	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Ball Indentation Hardness	H358/30	ISO2039-1	113	Mpa

Flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5mm	UL94	V-0
UL flame retardant rating	UL flame retardant rating	2.0mm	UL94	5VA
Glow Wire Flammability Index	1.0mm	IEC60695-2-12	960	°C
Glow Wire Ignition Temperature	1.0mm	IEC60695-2-13	775	°C
	Glow Wire Ignition Temperature	2.0mm	IEC60695-2-13	775	°C
	Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0mm	IEC60695-2-13	775	°C
Oxygen Index		ISO4589-2	32	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.