Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.20到0.30 | % |
Modeling Shrinkage | TD | ASTMD955 | 0.50到0.70 | % |
Modeling Shrinkage | TD | ISO294-4 | 0.50 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.20 | % |
Moisture Absorption | 饱和,23°C | ISO62 | 0.020 | % |
Density | -- | ASTMD792 | 1.70 | g/cm³ |
Density | -- | ISO1183 | 1.69 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | | ISO178 | 245 | Mpa |
Tensile Modulus | | ISO527-2/1A/1 | 14400 | Mpa |
Tensile Elongation | 断裂 | ISO527-2/1A/5 | 1.6 | % |
Tensile Elongation | 断裂,23°C | ASTMD638 | 2.0 | % |
Flexural Modulus | 23°C | ISO178 | 13700 | Mpa |
Tensile Strength | 断裂 | ISO527-2/1A/5 | 165 | Mpa |
Tensile Strength | 断裂,23°C | ASTMD638 | 152 | Mpa |
Specific Wear Rate | 416Stainless:32°C | ASTMD3702 | 166 | 10^-10in³·min/ft·lb·hr |
Specific Wear Rate | C-1018Steel:49°C | ASTMD3702 | 323 | 10^-10in³·min/ft·lb·hr |
Specific Wear Rate | C-1018Steel:93°C | ASTMD3702 | 825 | 10^-10in³·min/ft·lb·hr |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.2E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 4E-05 | cm/cm/°C |
Melting temperature | | ISO11357-3 | 280 | °C |
Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 268 | °C |
Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 270 | °C |
Deflection Temperature Under Load? | 8.0MPa,未退火 | ISO75-2/C | 215 | °C |
Glass Transition Temperature | | ISO11357-2 | 90.0 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 8.5 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 8.5 | kJ/m² |
Notched Izod Impact Strength | -30°C | ISO180/1A | 8.5 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 8.5 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 44 | kJ/m² |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|
SpecimenThickness-Shrinkage | | 内部方法 | 3.18 | mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.