LCP ZENITE® 5145L GY001 CELANESE USA

Unit Price:
$6279 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
50MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	ISO 294-4	0.50	%
Modeling Shrinkage	Modeling Shrinkage	流量	ISO 294-4	0.10	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	Break	ISO 527-2/1A/5	115	Mpa
Tensile Strain	Break	ISO 527-2/1A/5	3.1	%
Tensile Modulus		ISO 527-2/1A	15000	Mpa
Flexural Modulus	23°C	ISO 178	11000	Mpa
Flexural Stress	23°C	ISO 178	190	Mpa
Compressive Stress	1% Strain	ISO 604	21.3	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	Flow	ISO 11359-2	7.0E-6	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ISO 75-2/A	290	°C
Melting Temperature		ISO 11357-3	319	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface Resistivity		IEC 60093	1.0E+15	ohms
Volume Resistivity		IEC 60093	1.0E+15	ohms·cm
Dissipation Factor?	1 MHz	IEC 60250	0.018
Dielectric Strength		IEC 60243-1	45	KV/mm
Relative Permittivity	1 MHz	IEC 60250	3.90
Comparative Tracking Index		IEC 60112	175	V

Fill Analysis	Test Method	Test Result	Unit
Thermal Conductivity	内部方法	0.35	W/m/K
Melt Density	内部方法	1.48	g/cm³
Ejection Temperature		265	°C
Specific Heat Capacity of Melt		1500	J/kg/°C

Injection	Test Result	Unit
Drying Temperature	150	°C
Suggested Max Moisture	0.010	%
Processing (Melt) Temp	325 到 345	°C
Mold Temperature	80 到 120	°C
Drying Time	3.0	hr
Rear Temperature	320 到 330	°C
Middle Temperature	335 到 345	°C
Front Temperature	335 到 345	°C
Nozzle Temperature	335 到 345	°C
Back Pressure	< 3.00	Mpa
Hopper Temperature	20 到 30	°C

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	0.8 mm	UL 94	V-0
Flame Rating	Flame Rating	1.5 mm	UL 94	V-0
Oxygen Index		ISO 4589-2	33	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.