Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 0.40 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.10 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.030 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-2/1A/1 | 15000 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 150 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 1.6 | % |
Flexural Modulus | 23°C | ISO178 | 13500 | Mpa |
Flexural Stress | 23°C | ISO178 | 220 | Mpa |
Compressive Modulus | | ISO604 | 14000 | Mpa |
CompressiveStress | 1%Strain | ISO604 | 93.0 | Mpa |
Flexural Strain (Break) | | ISO178 | 2.2 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 276 | °C |
Deflection Temperature Under Load? | 8.0MPa,Unannealed | ISO75-2/C | 216 | °C |
Vicat Softening Temperature | | ISO306/B50 | 195 | °C |
Melting Temperature | | ISO11357-3 | 335 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 7E-06 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 2E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+14 | ohms |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Dielectric Strength | | IEC60243-1 | 32 | KV/mm |
Relative Permittivity | 100Hz | IEC60250 | 4.00 | |
Relative Permittivity | 1MHz | IEC60250 | 3.30 | |
Relative Permittivity | 2.05GHz | 内部方法 | 4.23 | |
Dissipation Factor? | 100Hz | IEC60250 | 0.010 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.025 | |
Dissipation Factor? | 2.05GHz | 内部方法 | 6E-03 | |
Arc Resistance | | 内部方法 | 140 | sec |
Comparative Tracking Index | | IEC60112 | 175 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 43 | kJ/m² |
Notched Izod impact strength | 23°C | ISO180/1U | 31 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ISO2039-2 | 71 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | | UL94 | V-0 | |
Oxygen Index | | ISO4589-2 | 45 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.