LCP SUMIKASUPER® E6008LMR B SUMITOMO JAPAN

Unit Price:
$6263 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
50MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:dimensional stability Low warpage Low viscosity High rigidity Good forming performance Weldable Aging resistance Good adhesion Chemical resistance heat-resisting Glass fiber reinforced high strength
Application Areas:Household appliances Household appliances Automotive sector Electrical appliances Electronic field Engineering accessories Automotive sector Food containers
Color:--
Grade:Injection grade

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	内部方法	1.2	%
Modeling Shrinkage	Modeling Shrinkage	流量	内部方法	0.18	%
Moisture Absorption	Saturation	ASTM D570	0.020	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Strength		ASTM D638	147	Mpa
Tensile Elongation	Break	ASTM D638	5.2	%
Flexural Modulus	23°C	ASTM D790	12300	Mpa
Flexural Modulus	Flexural Modulus	200°C	ASTM D790	4900	Mpa
Flexural Strength	23°C	ASTM D790	143	Mpa
Flexural Strength	Flexural Strength	200°C	ASTM D790	33.0	Mpa
Shearing Strength		ASTM D732	51.0	Mpa
Poisson Ratio		ASTM D785	0.46

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ASTM D648	279	°C
Thermal Conductivity		JIS R2618	0.52	W/m/K
Linear thermal expansion coefficient	Flow : 150°C	内部方法	1.3E-5	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : 150°C	内部方法	5.6E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Comparative Tracking Index		IEC 60112	125	V
Dissipation Factor?	1 kHz	ASTM D150	0.022
Dissipation Factor?	Dissipation Factor?	1 MHz	ASTM D150	0.022
Dielectric Constant	1 kHz	ASTM D150	4.40
Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	3.90
Arc Resistance		ASTM D495	130	sec
Volume Resistivity		ASTM D257	1.0E+15	ohms·cm

Injection	Test Result	Unit
Drying Time	4.0 到 24	hr
Rear Temperature	280 到 320	°C
Middle Temperature	320 到 350	°C
Front Temperature	340 到 370	°C
Nozzle Temperature	340 到 370	°C
Back Pressure	1.00 到 5.00	Mpa
Screw Speed	50 到 100	rpm
Injection Pressure	80.0 到 160	Mpa
Injection Rate	中等偏快
Drying Temperature	130	°C
Processing (Melt) Temp	360	°C
Mold Temperature	40 到 160	°C
Holding Pressure	20.0 到 40.0	Mpa

Impact Properties	Test Condition	Test Method	Test Result	Unit
Unnotched Izod Impact Strength	6.40 mm	ASTM D256	410	J/m

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	R-Scale	ASTM D785	103

Flammability	Test Condition	Test Method	Test Result	Unit
Soldering Resistance		内部方法	300	°C
Oxygen Index		ISO 527-1,-2(JIS K7161,7162)	48	%
Flame Rating	0.30 mm, ALL	UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.