Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | normal | ISO 2577 | 0.40 | % |
| Modeling Shrinkage | parallel | ISO 2577 | 0.60 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Unnotched Izod Impact Strength | 23℃ | ISO 180/1U | 14.0 | KJ/m |
| Tensile Strength | | ISO 527-1,-2/5 | 155 | Mpa |
| Tensile Elongation | Break | ISO 527-1,-2/5 | 1.3 | % |
| Flexural Modulus | 23℃ | ISO 178 | 16000 | Mpa |
| Flexural Strength | 23℃ | ISO 178 | 220 | Mpa |
| Notched Izod Impact Strength | 23℃ | ISO 180/1A | 12.0 | KJ/m |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 12.0 | KJ/m |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Coefficient of Linear Thermal Expansion | parallel | ISO 11359-1,-2 | 1E-06 | cm/cm℃ |
| Coefficient of Linear Thermal Expansion | normal | ISO 11359-1,-2 | 0.000023 | cm/cm℃ |
| Deflection Temperature Under Load? | 1.80MPa | ISO 75-1,-2 | 335 | °C |
| Flammability | | UL 94 | V-0 | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Relative Permittivity | 1000Hz | IEC 60250 | 3.50 | |
| Surface Resistivity | | IEC 60093 | 1E+17 | ohms |
| Volume Resistivity | | IEC 60093 | 1E+15 | ohm.m |
| Dielectric Strength | | IEC 60243-1 | 37 | KV/mm |
| Dissipation Factor? | 1000Hz | IEC 60250 | 0.0090 | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Density / Specific Gravity | | ISO 1183 | 1670 | kg/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
