LCP SUMIKASUPER® E6810（BK） SUMITOMO JAPAN

Unit Price:
$6204 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
50MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Dimensional stability Low warpage Low viscosity High elasticity High temperature strength Aging resistance
Application Areas:Electrical field Electrical appliances Electronic field Engineering accessories Automotive sector Food containers
Color:--
Grade:Injection grade

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow	ASTM D955	0.22	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow	ASTM D955	0.66	%
Moisture Absorption	Saturation	ASTM D570	0.020	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Elongation	Break	ASTM D638	4.3	%
Flexural Modulus	23°C	ASTM D790	13500	Mpa
Flexural Strength	23°C	ASTM D790	134	Mpa
Shearing Strength		ASTM D732	50.0	Mpa
Poisson Ratio		ASTM E132	0.39
Tensile Strength		ASTM D638	126	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	Flow : 50 to 150°C	ASTM D696	1.1E-5	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : 50 to 150°C	ASTM D696	6.5E-5	cm/cm/°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ASTM D648	284	°C
RTI	3.2 mm	UL 746	240	°C
RTI Imp	3.2 mm	UL 746	200	°C
RTI Elec	3.2 mm	UL 746	220	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Constant	1 kHz	ASTM D150	4.30
Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	3.90
Arc Resistance		ASTM D495	130	sec
Volume Resistivity		ASTM D257	1.0E+15	ohms·cm
Dissipation Factor?	1 kHz	ASTM D150	0.019
Dissipation Factor?	Dissipation Factor?	1 MHz	ASTM D150	0.028
Comparative Tracking Index		UL 746	165	V

Injection	Test Result	Unit
Injection Pressure	78.0 到 157	Mpa
Suggested Max Regrind	30	%
Injection Rate	中等偏快
Drying Time	3.0	hr
Rear Temperature	300 到 320	°C
Middle Temperature	320 到 350	°C
Front Temperature	340 到 370	°C
Nozzle Temperature	340 到 370	°C
Back Pressure	0.980 到 4.90	Mpa
Screw Speed	50 到 100	rpm
Drying Temperature	120 到 150	°C
Mold Temperature	70 到 160	°C
Holding Pressure	20.0 到 39.0	Mpa

Impact Properties	Test Condition	Test Method	Test Result	Unit
Unnotched Izod Impact Strength	6.40 mm	ASTM D256	280	J/m

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	R-Scale	ASTM D785	103

Flammability	Test Condition	Test Method	Test Result	Unit
Oxygen Index		ASTM D2863	46	%
Flame Rating	0.30 mm	UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.