Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.66 | |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 0.40 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.10 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 4E-03 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 7E-03 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Break | ISO527-2/1A/5 | 140 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 1.3 | % |
Tensile Modulus | | ISO527-2/1A/1 | 15500 | Mpa |
Tensile Strength | | ASTM D638/ISO 527 | 155 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | | ASTM D790/ISO 178 | 16000 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | 23°C | ISO178 | 14500 | Mpa |
Flexural Strength | | ASTM D790/ISO 178 | 220 | kg/cm²(MPa)[Lb/in²] |
Flexural Stress | 23°C | ISO178 | 230 | Mpa |
CompressiveStress | 1%Strain | ISO604 | 114 | Mpa |
Flexural Strain (Break) | | ISO178 | 2.0 | % |
Charpy impact strength | | ASTM D256/ISO 179 | 12 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 340 | ℃(℉) |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 340 | °C |
Deflection Temperature Under Load? | 8.0MPa,Unannealed | ISO75-2/C | 267 | °C |
Melting Temperature | | ISO11357-3 | 350 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 1E-06 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 2.3E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | IEC60243-1 | 37 | KV/mm |
Relative Permittivity | 1MHz | IEC60250 | 3.50 | |
Surface Resistivity | | IEC60093 | 1E+17 | ohms |
Arc Resistance | | ASTM D495/IEC 60112 | 138 | |
Volume Resistivity | | IEC60093 | 1E+17 | ohms·cm |
Dissipation Factor? | 1MHz | IEC60250 | 9E-03 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod impact strength | 23°C | ISO180/1U | 14 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.