Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | 内部方法 | 0.38 | % |
| Modeling Shrinkage | TD | 内部方法 | 0.46 | % |
| Equilibrium,23°C,50%RH | | ISO62 | 0.040 | % |
| 24hr,50%RH | | ASTMD570 | 0.080 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Break,50.0mm Span | | ASTMD790 | 90.0 | Mpa |
| Flexural Strain (Break) | | ISO178 | 2.8 | % |
| Yield,50.0mm Span | | ASTMD790 | 90.0 | Mpa |
| Break | | ASTMD638 | 60.0 | Mpa |
| --1 | | ASTMD638 | 6000 | Mpa |
| fracture | | ISO527-2/5 | 1.8 | % |
| fracture | | ISO527-2/5 | 62.0 | Mpa |
| Flexural Modulus | 50.0mmSpan | ASTMD790 | 5300 | Mpa |
| Break | | ASTMD638 | 1.8 | % |
| --5 | | ISO178 | 105 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| 1.8MPa, Unannealed,3.20mm | | ASTMD648 | 94.0 | °C |
| -- | | ASTM D152512, ISO 306/B50, ISO 306/B120 | 105 | °C |
| -- | | ASTMD152516 | 101 | °C |
| -- | | ISO306/A50 | 102 | °C |
| Flow:-40 to 40°C | | ASTME831 | 3.1E-05 | cm/cm/°C |
| Flow:-40 to 40°C | | ASTME831 | 5.8E-05 | cm/cm/°C |
| Flow:23 to 60°C | | ISO11359-2 | 2.9E-05 | cm/cm/°C |
| Flow:23 to 60°C | | ISO11359-2 | 7.4E-05 | cm/cm/°C |
| 1.8MPa, Unannealed,6.40mm | | ASTMD648 | 96.0 | °C |
| 1.8MPa, Unannealed,64.0mm Span | | ISO75-2/Af | 96.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| StaticDecay17 | | FTMS101B | 10 | msec |
| EMI Attenuation | 1.50mm | 内部方法 | 47到53 | dB |
| EMI Attenuation | 3.00mm | 内部方法 | 60到70 | dB |
| Surface Resistivity | | ASTMD257 | 1.0E+3到1.0E+6 | ohms |
| Volume Resistivity | | ASTMD257 | 1.0E+4到1.0E+6 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| -30°C12 | | ISO180/1U | 21 | kJ/m² |
| 23°C13 | | ISO180/1U | 21 | kJ/m² |
| -30°C | | ASTMD256 | 44 | J/m |
| -30°C | | ASTMD4812 | 330 | J/m |
| -- | | ISO6603-2 | 4.30 | J |
| Charpy Notched Impact Strength | 23°C | ISO179/1eA | 7.6 | kJ/m² |
| 23°C | | ASTMD256 | 60 | J/m |
| 23°C | | ASTMD4812 | 350 | J/m |
| 23°C,TotalEnergy | | ASTMD3763 | 11.5 | J |
| -30°C10 | | ISO180/1A | 5.3 | kJ/m² |
| 23°C11 | | ISO180/1A | 6.0 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.50mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
