Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.40to0.60 | % |
Moisture Absorption | 24hr | ASTMD570 | 0.11 | % |
Melt Mass-Flow Rate | 260°C/2.16kg | ASTMD1238 | 22 | g/10min |
Density / Specific Gravity | | ASTMD792 | 1.19 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break | ASTMD638 | 80 | % |
Tensile Elongation | Yield | ASTMD638 | 4.0 | % |
Tensile Modulus | | ASTMD638 | 3000 | Mpa |
Tensile Strength | Yield | ASTMD638 | 63.0 | Mpa |
Tensile Strength | Break | ASTMD638 | 49.0 | Mpa |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 2620 | Mpa |
Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 94.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ASTMD15255 | 99.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 98.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 83.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 90.0 | °C |
RTIElec | | UL746 | 80.0 | °C |
Evolution Calendar intelligent importer | | UL746 | 70.0 | °C |
RTIStr | | UL746 | 80.0 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor? | 50Hz | IEC60250 | 4E-03 | |
Dissipation Factor? | 60Hz | IEC60250 | 4E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 6E-03 | |
Dielectric Strength | 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm |
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Relative Permittivity | 50Hz | IEC60250 | 2.70 | |
Relative Permittivity | 60Hz | IEC60250 | 2.70 | |
Relative Permittivity | 1MHz | IEC60250 | 2.70 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 23°C | ASTMD256 | 550 | J/m |
Instrumented Dart Impact | -30°C,TotalEnergy | ASTMD3763 | 51.0 | J |
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 51.0 | J |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.75mm | UL94 | V-2 | |
UL flame retardant rating | 1.5mm | UL94 | V-0 | |
UL flame retardant rating | 2.0mm | UL94 | 5VB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.