Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Viscosity | (260°C) 4 | ISO 11443-A | 220 | Pa·s |
Melt Volume flow Rate | 260℃,5 kg | ISO 1133 | 24 | cm3/10min |
Moisture Absorption | Saturation,23℃ | | 0.5 | % |
Moisture Absorption | Equilibrium,23℃,50% RH | | 0.2 | % |
Modeling Shrinkage | TD | | 0.20 到 0.30 | % |
Modeling Shrinkage | MD | | 0.20 到 0.30 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strain | Yield,23°C | | 3.2 | % |
Tensile Strain | Break,23℃ | | 6 | % |
Tensile Stress | Yield,23°C | | 62 | Mpa |
Tensile Stress | Break,23°C | | 48 | Mpa |
Tensile Modulus | 23℃ | ISO 527-1-2 | 5400 | Mpa |
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | 10000000000000000 | ohms |
Volume Resistivity | 23℃ | IEC 60093 | 100000000000000000 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 23℃,Complete Break | ISO 180-A | 6 | kJ/m² |
Unnotched Izod Impact Strength | 23℃ | ISO 180 | 52 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Glow Wire Flammability Index | 1.0 mm | IEC 60695-2-12 | 850 | °C |
Flame Rating | 1.20 mm | UL 94 | V-0 | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | -- | ISO 306 | 99 | °C |
Vicat Softening Temperature | -- | ISO 306/B120 | 102 | °C |
Heat Deflection Temperature | 0.45 MPa,Unannealed | ISO 75-2/B | 96 | °C |
Heat Deflection Temperature | 1.8 MPa,Unannealed | ISO 75-2/A | 88 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.