Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.14 | |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD：3.20mm | ASTMD955 | 0.50到0.80 | % |
| Melt Mass-Flow Rate | 250°C/2.16kg | ASTMD1238 | 5.5 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Modulus | 3.20mm | ASTMD790 | 2260 | Mpa |
| Tensile Strength | Yield,3.20mm | ASTMD638 | 56.9 | Mpa |
| Tensile Elongation | Break,3.20mm | ASTMD638 | >100 | % |
| Flexural Strength | Yield,3.20mm | ASTMD790 | 86.3 | Mpa |
| Rockwell Hardness | | ASTM D785 | 114 | |
| Flexural Modulus | | ASTM D790/ISO 178 | 2160 | kg/cm²(MPa)[Lb/in²] |
| Flexural Strength | | ASTM D790/ISO 178 | 85.3 | kg/cm²(MPa)[Lb/in²] |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 114 | °C |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R-Scale | ASTMD785 | 114 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
