Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.50to0.70 | % |
Moisture Absorption | 24hr | ASTMD570 | 0.15 | % |
Moisture Absorption | Equilibrium,23°C | ASTMD570 | 0.35 | % |
Moisture Absorption | Equilibrium,100°C | ASTMD570 | 0.58 | % |
Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 11 | g/10min |
Outdoor Suitability | | UL746C | f2 | |
Density / Specific Gravity | | ASTMD792 | 1.19 | g/cm³ |
Density / Specific Gravity | | ASTMD792 | 1.20 | g/cm³ |
Specific Volume | | ASTMD792 | 0.835 | cm³/g |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield | ASTMD638 | 62.1 | Mpa |
Tensile Strength | Break | ASTMD638 | 68.9 | Mpa |
Tensile Elongation | Yield | ASTMD638 | 7.0 | % |
Tensile Elongation | Break | ASTMD638 | 130 | % |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 2340 | Mpa |
Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 96.5 | Mpa |
Taber Abrasion Resistance | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD:-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 132 | °C |
RTIElec | | UL746 | 130 | °C |
Evolution Calendar intelligent importer | | UL746 | 130 | °C |
RTIStr | | UL746 | 130 | °C |
Specific Heat | | ASTMC351 | 1260 | J/kg/°C |
Thermal Conductivity | | ASTMC177 | 0.27 | W/m/K |
Vicat Softening Temperature | | ASTMD15255 | 154 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Hot-wire Ignition | HWI | UL746 | PLC2 | |
High Amp Arc Ignition | HAI | UL746 | PLC1 | |
High Voltage Arc Tracking Rate | HVTR | UL746 | PLC2 | |
Dissipation Factor? | 50Hz | ASTMD150 | 9E-04 | |
Dissipation Factor? | 60Hz | ASTMD150 | 9E-04 | |
Dissipation Factor? | 1MHz | ASTMD150 | 0.010 | |
Dielectric Constant | 50Hz | ASTMD150 | 3.17 | |
Dielectric Constant | 60Hz | ASTMD150 | 3.17 | |
Dielectric Constant | 1MHz | ASTMD150 | 2.96 | |
Volume Resistivity | | ASTMD257 | >1.0E+17 | ohms·cm |
Dielectric Strength | 3.20mm,inAir | ASTMD149 | 15 | KV/mm |
Comparative Tracking Index | CTI | UL746 | PLC2 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 23°C | ASTMD256 | 800 | J/m |
Notched Izod Impact Strength | 23°C | ASTMD4812 | 3200 | J/m |
Instrumented Dart Impact | 23°C,EnergyatPeakLoad | ASTMD3763 | 63.8 | J |
Gardner Impact | 23°C | ASTMD3029 | 169 | J |
Tensile Impact Strength | | ASTMD1822 | 578 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Sale | ASTMD785 | 70 | |
Rockwell Hardness | R-Sale | ASTMD785 | 118 | |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Haze | 2540µm | ASTMD1003 | 1.0 | % |
Refractive index of light | | ASTMD542 | 1.586 | |
Transmittance | 2540µm | ASTMD1003 | 88.0 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.1mm | UL94 | V-2 | |
UL flame retardant rating | 6.0mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.