Technical Data Sheet
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | > 1.0E+15 | ohms |
Dielectric Strength | | IEC 60243-1 | 32 | KV/mm |
Relative Permittivity | 100 Hz | IEC 60250 | 3 | |
Relative Permittivity | 1 MHz | IEC 60250 | 3 | |
Dissipation Factor | 100 Hz | IEC 60250 | 0.001 | |
Dissipation Factor | 1 MHz | IEC 60250 | 0.009 | |
Comparative Tracking Index | | IEC 60112 | 300 | V |
Volume Resistivity | | IEC 60093 | > 1.0E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | | ISO 179 | 25 | kJ/m² |
Charpy Unnotched Impact Strength | | ISO 179 | No Break | |
物理性能 | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ISO 1183 | 1.26 | g/cm³ |
Modeling Shrinkage | TD:4.0 mm | 内部方法 | 0.50 to 0.70 | % |
Modeling Shrinkage | MD:4.0 mm | 内部方法 | 0.50 to 0.70 | % |
Moisture Absorption | 23℃,24hr | ISO 62 | 0.17 | % |
机械性能 | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break | ISO 527-2/50 | 50 | Mpa |
Tensile Strength | Yield | ISO 527-2/50 | 50 | Mpa |
Flexural Strength | | ISO 178 | 80 | Mpa |
Flexural Modulus | | ISO 178 | 2200 | Mpa |
Tensile Modulus | | ISO 527-1-2 | 2400 | Mpa |
Tensile Strain | Break | ISO 527-2/50 | 110 | % |
Tensile Strain | Yield | ISO 527-2/50 | 6 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.50 mm | UL 94 | V-2 | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | B50 | ISO 306 | 141 | °C |
Heat Deflection Temperature | 1.8 MPa,Unannealed | ISO 75-2/A | 130 | °C |
Heat Deflection Temperature | 0.45 MPa,Unannealed | ISO 75-2/B | 139 | °C |
Coefficient of Linear Thermal Expansion | TD | ISO 11359-2 | 0.000070 | 1/℃ |
Coefficient of Linear Thermal Expansion | MD | ISO 11359-2 | 0.000070 | 1/℃ |
Relative Temperature Index | 电气性能,1.50 mm | UL 746 | 115 | °C |
Relative Temperature Index | 强度机械性能,1.50 mm | UL 746 | 105 | °C |
Relative Temperature Index | 冲击机械性能,1.50 mm | UL 746 | 105 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.