Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.60到0.80 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 0.35 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.15 | % |
Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 7.0 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
yield | | ISO527-2/50 | 62.0 | Mpa |
yield | | ISO527-2/50 | 6.0 | % |
fracture | | ISO527-2/50 | 58.0 | Mpa |
fracture | | ISO527-2/50 | 75 | % |
50.0mm Span | | ASTMD790 | 2160 | Mpa |
--7 | | ISO178 | 2250 | Mpa |
--8 | | ISO178 | 95.0 | Mpa |
--1 | | ASTMD638 | 2300 | Mpa |
Yield | | ASTMD638 | 6.0 | % |
Break | | ASTMD638 | 80 | % |
Yield | | ASTMD638 | 62.0 | Mpa |
Break | | ASTMD638 | 65.0 | Mpa |
Yield,50.0mm Span | | ASTMD790 | 95.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
1.8MPa, Unannealed,3.20mm | | ASTMD648 | 125 | °C |
0.45MPa, Unannealed,3.20mm Span | | ISO75-2/Bf | 135 | °C |
1.8MPa, Unannealed,64.0mm Span | | ISO75-2/Af | 125 | °C |
Vicat Softening Temperature | | ASTMD152513 | 141 | °C |
Ball PressureTest | 125°C | IEC60695-10-2 | Pass | |
Linear thermal expansion coefficient | MD:-40to40°C | ASTME831 | 6.8E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:-40to40°C | ASTME831 | 6.7E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | CTI | UL746 | PLC3 | |
Hot-wire Ignition | HWI | UL746 | PLC3 | |
High Amp Arc Ignition | HAI | UL746 | PLC1 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 70.0 | J |
23°C | | ASTMD256 | 150 | J/m |
23°C10 | | ISO180/1A | 15 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.50mm | UL94 | V-0 | |
Glow Wire Flammability Index | 1.00mm | IEC60695-2-12 | 960 | °C |
Glow Wire Ignition Temperature | 1.50mm | IEC60695-2-13 | 850 | °C |
Glow Wire Ignition Temperature | 1.00mm | IEC60695-2-13 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.