Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD2.0mm | ISO294-4 | 0.90 | % |
Modeling Shrinkage | TD2.0mm | ISO294-4 | 0.90 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 0.30 | % |
Moisture Absorption | 23°C,50RH | ISO62 | 0.12 | % |
Melt Mass-Flow Rate | 330℃/2.16Kg | ISO1133 | 8.00 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | 23°C | ISO527-2 | >50 | % |
Tensile Modulus | 23°C | ISO527-2 | 2450 | Mpa |
Tensile Strength | 23°C | ISO527-2 | 76 | Mpa |
Flexural Modulus | 23°C | ISO178 | 2450 | Mpa |
Flexural Strength | 23°C | ISO178 | 110 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPaUnannealed | ISO75-2/Bf | 192 | °C |
Deflection Temperature Under Load? | 1.80MPaUnannealed | ISO75-2/Af | 173 | °C |
Coefficient of Linear Thermal Expansion | MD | ISO11359-2 | 6.5E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD | ISO11359-2 | 6.5E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Insulation strength | | IEC60243-1 | 35 | KV/mm |
Volume Resistivity | | IEC60093 | 1E+17 | Ω.cm |
Dissipation Factor? | 23°C | IEC60250 | 1E-03 | 100HZ |
Dissipation Factor? | 23°C | IEC60250 | 9E-03 | 1MHz |
Dielectric Constant | 23°C | IEC60250 | 2.80 | 1MHz |
Surface resistance | | IEC60093 | 1E+16 | Ω.cm |
Comparative Tracking Index | | IEC60112 | 600 | V |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Refractive index of light | | ISO489 | 1.57 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.