Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | In-house method | 0.5-0.7 | % |
Modeling Shrinkage | TD | In-house method | 0.5-0.7 | % |
Modeling Shrinkage | TD:4.00mm | 内部方法 | 0.50到0.70 | % |
Modeling Shrinkage | MD:4.00mm | 内部方法 | 0.50到0.70 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 0.20 | % |
Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 3.50 | cm3/10min |
Melt Mass-Flow Rate | 300℃ | ISO 1133 | 3.5 | cm310min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength(Break) | 50mm/min | ISO 527-1 | 53 | Mpa |
Tensile Strength(Yield) | 50mm/min | ISO 527-1,2 | 65 | Mpa |
Nominal Tensile Strain at Break | | ISO527-2/50 | 25 | % |
Flexural Modulus | | ISO178 | 2400 | Mpa |
Flexural Stress | | ISO178 | 98.0 | Mpa |
Tensile Stress | Yield | ISO527-2/50 | 65.0 | Mpa |
Tensile Stress | Break | ISO527-2/50 | 53.0 | Mpa |
Tensile Strain | Yield | ISO527-2/50 | 6.0 | % |
Notched Impact Strength | Notched | ISO 179 | 8.0 | kJ/m² |
Tensile Elongation?(Break) | 50mm/min | ISO 527-1 | 25 | % |
Tensile Modulus | | ISO527-2/1 | 2400 | Mpa |
Flexural Modulus | 2mm/min | ISO 178 | 2400 | Mpa |
Flexural Strength | 2mm/min | ISO 178 | 98 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 122 | °C |
Deflection Temperature Under Load? | 1.80MPa | ISO 75-1,2 | 122 | °C |
Deflection Temperature Under Load? | 线膨胀系数,MD | ISO 11359-2 | 0.7 | X10-4/℃ |
Deflection Temperature Under Load? | TD | ISO 11359-2 | 0.7 | X10-4/℃ |
Flame retardancy | 1.5mmt | UL94 | V-0 | |
RTIElec | 1.5mm | UL746 | 130 | °C |
Evolution Calendar intelligent importer | 1.5mm | UL746 | 125 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 7E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 7E-05 | cm/cm/°C |
RTI | 1.5mm | UL746 | 130 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC60112 | 250 | V |
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | 23°C | ISO179 | 无断裂 | |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Transmittance | 1.5mmt | JIS K7136 | 85 | % |
Transmittance | 3000µm | ASTMD1003 | 77.0 | % |
Particle Size Distribution | 2.0mmt | In-house method | 17 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | V-0 | |
Glow Wire Flammability Index | 1.5mm | IEC60695-2-12 | 960 | °C |
Glow Wire Flammability Index | 3.0mm | IEC60695-2-12 | 960 | °C |
Glow Wire Ignition Temperature | 1.5mm | IEC60695-2-13 | 875 | °C |
Glow Wire Ignition Temperature | 3.0mm | IEC60695-2-13 | 875 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.