Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 8.5 | g/10min |
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.20to0.40 | % |
Modeling Shrinkage | TD:3.20mm | 内部方法 | 0.45to0.65 | % |
Density / Specific Gravity | | ASTMD792 | 1.34 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break | ASTMD638 | 4.0 | % |
Flexural Strength | Break,50.0mmSpan | ASTMD790 | 165 | Mpa |
Tensile Modulus | | ASTMD638 | 3450 | Mpa |
Tensile Strength | Yield | ASTMD638 | 100 | Mpa |
Tensile Strength | Break | ASTMD638 | 107 | Mpa |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 5520 | Mpa |
Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 157 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed,3.20mm | ASTMD648 | 142 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 138 | °C |
RTIElec | | UL746 | 80.0 | °C |
Evolution Calendar intelligent importer | | UL746 | 80.0 | °C |
RTIStr | | UL746 | 80.0 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 3.39 | J |
Notched Izod Impact Strength | 23°C | ASTMD256 | 110 | J/m |
Notched Izod Impact Strength | 23°C | ASTMD4812 | 530 | J/m |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | V-1 | |
UL flame retardant rating | 3.0mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.