Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 300°C/1.2kg | ISO1133 | 22 | g/10min |
Modeling Shrinkage | MD | ISO294-4 | 0.50到0.70 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield,4.00mm,Injection | ISO527-2/50 | 60.0 | Mpa |
Tensile Stress | Break,4.00mm,Injection | ISO527-2/50 | 58.0 | Mpa |
Tensile Strain | Break,4.00mm,Injection | ISO527-2/50 | >100 | % |
Tensile Strain | Yield,4.00mm,Injection | ISO527-2/50 | 6.0 | % |
Tensile Modulus | 4.00mm,Injection | ISO527-2/1 | 2400 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ISO306/A120 | 149 | °C |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Transmittance | | ASTMD1003 | 87.0到91.0 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Glow Wire Ignition Temperature | 3.0mm | IEC60695-2-13 | 850 | °C |
Glow Wire Ignition Temperature | 2.0mm | IEC60695-2-13 | 850 | °C |
Glow Wire Ignition Temperature | 1.0mm | IEC60695-2-13 | 850 | °C |
Flame Rating | 2.5mm | UL94 | V-0 | |
Glow Wire Flammability Index | 3.0mm | IEC60695-2-12 | 960 | °C |
Glow Wire Flammability Index | 2.0mm | IEC60695-2-12 | 960 | °C |
Glow Wire Flammability Index | 1.0mm | IEC60695-2-12 | 960 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.