PC LEXAN™ 104R-111 SABIC INNOVATIVE NANSHA

Unit Price:
$1995 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
30MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:--
Application Areas:Nursing supplies Food packaging Medical supplies
Color:--
Grade:--

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：3.20mm	内部方法	0.50to0.70	%
Moisture Absorption	24hr	ASTMD570	0.15	%
	Moisture Absorption	Saturation,23°C	ISO62	0.35	%
		Moisture Absorption	Equilibrium,23°C	ASTMD570	0.35	%
			Moisture Absorption	Equilibrium,100°C	ASTMD570	0.58	%
			Moisture Absorption	Moisture Absorption	Equilibrium,23°C,50%RH	ISO62	0.15	%
Melt Mass-Flow Rate	300°C/1.2kg	ASTMD1238	7.0	g/10min
Melt Volume flow Rate	220°C/5.0kg	ISO1133	4.00	cm3/10min
Melt Volume flow Rate	Melt Volume flow Rate	300°C/1.2kg	ISO1133	6.00	cm3/10min
Specific Volume		ASTMD792	0.830	cm³/g

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Strength		ISO178	90.0	Mpa
Tensile Elongation	Break	ASTMD638	140	%
Tensile Modulus		ASTMD638	2310	Mpa
Tensile Strength	Break	ASTMD638	68.0	Mpa
Tensile Strength	Tensile Strength	Yield	ASTMD638	62.0	Mpa
Flexural Modulus	50.0mmSpan	ASTMD790	2340	Mpa
Flexural Strength	Yield,50.0mmSpan	ASTMD790	97.0	Mpa
Taber Abrasion Resistance	1000Cycles,1000g,CS-17Wheel	ASTMD1044	10.0	mg
Taber Abrasion Resistance	Taber Abrasion Resistance	1000Cycles,1000g,CS-17Wheel	内部方法	10.0	mg
Tensile Elongation	Yield	ASTMD638	7.0	%
Tensile Stress	Yield	ISO527-2/50	63.0	Mpa
Tensile Stress	Tensile Stress	Break	ISO527-2/50	70.0	Mpa
Tensile Strain	Yield	ISO527-2/50	6.0	%
Tensile Strain	Tensile Strain	Break	ISO527-2/50	120	%
Tensile Modulus		ISO527-2/1	2350	Mpa
Flexural Modulus		ISO178	2300	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Heat Deflection Temperature	0.45MPa,Unannealed,100mmSpan	ISO75-2/Be	138	°C
Deflection Temperature Under Load?	0.45MPa,Unannealed,6.40mm	ASTMD648	137	°C
	Deflection Temperature Under Load?	1.8MPa,Unannealed,100mmSpan10	ISO75-2/Ae	127	°C
		Deflection Temperature Under Load?	1.8MPa,Unannealed,64.0mmSpan11	ISO75-2/Af	124	°C
		Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,Unannealed,6.40mm	ASTMD648	132	°C
Linear thermal expansion coefficient	MD：-40to40°C	ASTME831	6.2E-05	cm/cm/°C
	Linear thermal expansion coefficient	MD：-40to40°C	ISO11359-2	6E-05	cm/cm/°C
		Linear thermal expansion coefficient	MD：23to80°C	ISO11359-2	7E-05	cm/cm/°C
			Linear thermal expansion coefficient	TD：-40to40°C	ASTME831	5.7E-05	cm/cm/°C
			Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：-40to40°C	ISO11359-2	6E-05	cm/cm/°C
RTIElec		UL746	130	°C
Evolution Calendar intelligent importer		UL746	130	°C
RTIStr		UL746	130	°C
Specific Heat		ASTMC351	1250	J/kg/°C
Thermal Conductivity		ASTMC177	0.19	W/m/K
Thermal Conductivity	Thermal Conductivity		ISO8302	0.20	W/m/K
Vicat Softening Temperature		ASTMD152512	154	°C
	Vicat Softening Temperature	--	ISO306/B50	144	°C
	Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B120	145	°C
Ball PressureTest	125°C	IEC60695-10-2	Pass
Ball PressureTest	Ball PressureTest	140°C13	IEC60695-10-2	Pass

Electrical performance	Test Condition	Test Method	Test Result	Unit
Hot-wire Ignition	HWI	UL746	PLC2
Comparative Tracking Index	CTI	UL746	PLC2
Relative Permittivity	50Hz	IEC60250	2.70
	Relative Permittivity	60Hz	IEC60250	2.70
	Relative Permittivity	Relative Permittivity	1MHz	IEC60250	2.70
Dissipation Factor?	50Hz	IEC60250	1E-03
	Dissipation Factor?	60Hz	IEC60250	1E-03
		Dissipation Factor?	1MHz	IEC60250	0.010
			Dissipation Factor?	50Hz	ASTMD150	9E-04
				Dissipation Factor?	60Hz	ASTMD150	9E-04
				Dissipation Factor?	Dissipation Factor?	1MHz	ASTMD150	0.010
Dielectric Strength	3.20mm,in Oil	IEC60243-1	17	KV/mm
Dielectric Strength	Dielectric Strength	3.20mm,inAir	ASTMD149	15	KV/mm
Dielectric Constant	50Hz	ASTMD150	3.17
	Dielectric Constant	60Hz	ASTMD150	3.17
	Dielectric Constant	Dielectric Constant	1MHz	ASTMD150	2.96
Volume Resistivity		ASTMD257	>1.0E+17	ohms·cm
High Amp Arc Ignition	HAI	UL746	PLC1
High Voltage Arc Tracking Rate	HVTR	UL746	PLC2

Impact Properties	Test Condition	Test Method	Test Result	Unit
Tensile Impact Strength		ASTMD1822	630	kJ/m²
Gardner Impact	23°C	ASTMD3029	169	J
Notched Izod Impact Strength	-30°C	ISO180/1A	10	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ISO180/1A	65	kJ/m²
Instrumented Dart Impact	23°C,TotalEnergy	ASTMD3763	65.0	J

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	M-Sale	ASTMD785	70
Rockwell Hardness	Rockwell Hardness	R-Sale	ASTMD785	118
Ball Indentation Hardness	H358/30	ISO2039-1	95.0	Mpa

optical performance	Test Condition	Test Method	Test Result	Unit
Refractive index of light		ASTMD542	1.586
Refractive index of light	Refractive index of light		ISO489	1.586
Haze	2540µm	ASTMD1003	1.0	%
Transmittance	2540µm	ASTMD1003	88.0	%

Flammability	Test Condition	Test Method	Test Result	Unit
Oxygen Index		ISO4589-2	25	%
UL flame retardant rating	1.5mm	UL94	HB
Glow Wire Flammability Index	1.0mm	IEC60695-2-12	850	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.