PC IUPILON™ ML-300 MITSUBISHI THAILAND

Unit Price:
$2647 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
116.2MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	TD:3.20mm		0.50to0.70	%
	Modeling Shrinkage	MD:3.20mm		0.50to0.70	%
	Modeling Shrinkage	Modeling Shrinkage	吸水率(Saturation,23°C)		0.24	%
Melt Mass-Flow Rate	300°C/1.2kg	ISO1133	16	g/10min
Melt Volume flow Rate	300°C/1.2kg	ISO1133	15.0	cm3/10min
Density / Specific Gravity		ISO1183	1.20	g/cm³

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Nominal Tensile Strain at Break		ISO527-2	120	%
Flexural Stress		ISO178	91.0	Mpa
Tensile Stress	Yield	ISO527-2	62.0	Mpa
Tensile Strain	Yield	ISO527-2	6.6	%
Tensile Modulus		ISO527-2	2500	Mpa
Flexural Modulus		ISO178	2300	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45MPa,Unannealed	ISO75-2/B	139	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,Unannealed	ISO75-2/A	124	°C
Linear thermal expansion coefficient	MD	ISO11359-2	6.3E-05	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD	ISO11359-2	7.3E-05	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dissipation Factor?	100Hz	IEC60250	7E-04
Dissipation Factor?	Dissipation Factor?	1MHz	IEC60250	9E-03
Dielectric Strength	1.00mm	IEC60243-1	31	KV/mm
Dielectric Strength	Dielectric Strength	3.00mm	IEC60243-1	17	KV/mm
Relative Permittivity	100Hz	IEC60250	3.10
Relative Permittivity	Relative Permittivity	1MHz	IEC60250	3.10
Surface Resistivity		IEC60093	4E+15	ohms
Volume Resistivity		IEC60093	3E+16	ohms·cm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength	23°C	ISO179	NoBreak
Charpy Notched Impact Strength	23°C	ISO179	64	kJ/m²

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.