Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.30 | |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 15 | g/10min |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.30到0.50 | % |
| Moisture Absorption | 23°C,24hr | ASTMD570 | <0.20 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | Break | ASTMD638 | 108 | Mpa |
| Rockwell Hardness | | ASTM D-785 | 121 | |
| Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 4.0 | % |
| Tensile Strength | | ASTM D638/ISO 527 | 640 | kg/cm²(MPa)[Lb/in²] |
| Tensile Strength | | ASTM D-638 | 108 | Mpa |
| Tensile Elongation | Break | ASTM D-638 | 4 | % |
| Tensile Elongation | Break | ASTMD638 | 4.0 | % |
| Flexural Modulus | | ASTMD790 | 5690 | Mpa |
| Flexural Modulus | | ASTM D-790 | 98-137 | J/m |
| Flexural Strength | | ASTM D790/ISO 178 | 85 | kg/cm²(MPa)[Lb/in²] |
| Flexural Strength | | ASTM D-790 | 5680 | Mpa |
| Flexural Strength | | ASTMD790 | 152 | Mpa |
| Izod Impact Strength | V-Notched，3.2mm | ASTM D-256 | 10-14 | kJ/m² |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Burning Rate | | UL94 | V-2/1.6mm | |
| Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 133 | ℃（℉） |
| Deflection Temperature Under Load? | | ASTM D-648 | 140-148 | °C |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 145 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 10HZ | ASTM D-150 | 3.3 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.20 | |
| Arc Resistance | | ASTMD495 | 110 | sec |
| Volume Resistivity | | ASTM D257/IEC 60093 | 10^16 | Ω.cm |
| Volume Resistivity | | ASTMD257 | 1E+16 | ohms·cm |
| Volume Resistivity | | ASTM D-25 | 1014 | Ω.cm |
| Dielectric Strength | 1.60mm | ASTMD149 | 20 | KV/mm |
| 孤光阻抗 | | ASTM D-495 | 110 | sec |
| Dissipation Factor? | 1MHz | ASTMD150 | 8E-03 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Haze | 3.00mm | ASTMD1003 | Translucent | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 3.0mm | UL94 | V-0 | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 23 ℃ | ASTM D-570 | 0.11 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
