Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23°C,24hr | ISO62 | 0.50 | % |
Melt Volume flow Rate | 190°C/2.16kg | ISO1133 | 18.0 | cm3/10min |
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 19 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | | ISO178 | 72.0 | Mpa |
Nominal Tensile Strain at Break | | ISO527-2 | 20 | % |
Coefficient of Friction | Dynamic2 | JISK7218 | 0.38 | |
Coefficient of Friction | Steel - Dynamic3 | JISK7218 | 0.75 | |
Specific Wear Rate | 0.49MPa,0.30m/sec4 | JISK7218 | <1.0 | 10^-8mm³/N·m |
Specific Wear Rate | 0.49MPa,0.30m/sec5 | JISK7218 | 600 | 10^-8mm³/N·m |
Specific Wear Rate | 0.060MPa,0.15m/sec6 | JISK7218 | 1500 | 10^-8mm³/N·m |
Specific Wear Rate | 0.060MPa,0.15m/sec7 | JISK7218 | 4000 | 10^-8mm³/N·m |
Tensile Stress | | ISO527-2 | 54.0 | Mpa |
Tensile Modulus | | ISO527-2 | 2250 | Mpa |
Flexural Modulus | | ISO178 | 2100 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD:23to55°C | 内部方法 | 1.2E-04 | cm/cm/°C |
Linear thermal expansion coefficient | TD:23to55°C | 内部方法 | 1.2E-04 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 5E+15 | ohms |
Volume Resistivity | | IEC60093 | 7E+13 | ohms·cm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ISO2039-2 | 80 | |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|
Color Number | | | CF2001 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.