Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.00mm | 内部方法 | 2.0 | % |
Moisture Absorption | 平衡,23°C,50%RH | ISO62 | 0.20 | % |
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 12 | g/10min |
Density | | ISO1183 | 1.38 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | | ISO178 | 75.0 | Mpa |
Tensile Stress | | ISO527-2 | 53.0 | Mpa |
Tensile Strain | 屈服 | ISO527-2 | 10 | % |
Tensile Strain | 断裂 | ISO527-2 | 25 | % |
Flexural Modulus | | ISO178 | 2100 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 90.0 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
Melting temperature | | ISO11357-3 | 165 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+16 | ohms |
Volume Resistivity | | IEC60093 | 1E+14 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 4.5 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.