Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Flow | | 1.2 | % |
Modeling Shrinkage | Across Flow | | 1.9 | % |
Moisture Absorption | Equilibrium | ASTM D570 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Friction | 与钢 - 动态 | | 0.20 | |
Abrasion Loss | -- 3 | | 1.30 | 10^-3 mm³/N·km |
Abrasion Loss | of counterpart 4 | | 0.00 | 10^-3 mm³/N·km |
Tensile Elongation | Break | ASTM D638 | 3.3 | % |
Flexural Modulus | | ASTM D790 | 6100 | Mpa |
Flexural Strength | | ASTM D790 | 121 | Mpa |
Tensile Strength | | ASTM D638 | 82.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Linear Thermal Expansion (Flow) | | ASTM D696 | 3.8E-5 | cm/cm/°C |
Heat Distortion | | ASTM D648 | 147 | °C |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Injection Pressure | | | 70.0 到 100 | Mpa |
Processing (Melt) Temp | | | 185 到 215 | °C |
Mold Temperature | | | 60 到 100 | °C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTM D785 | 74 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL 94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.