Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.41 | |
Modeling Shrinkage | | ASTM D955 | 1.6-2.0 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 8.0 | g/10min |
Melt index | | ISO 1133 | 8.0 | g/10 min |
Modeling Shrinkage | MD | Internal Method | 1.6-2.0 | % |
Modeling Shrinkage | MD | 内部方法 | 1.6到2.0 | % |
Moisture Absorption | 23°C,24hr,50%RH | ASTMD570 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield | ISO527-2 | 66.0 | Mpa |
Tensile Stress | -- | ASTMD638 | 64.0 | Mpa |
Tensile Stress | Yield, 23℃ | ISO 527-2 | 69.0 | Mpa |
Tensile Strain | Break,23℃ | ISO 527-2 | 55 | % |
Tensile Modulus | | ASTM D638/ISO 527 | 3000(MPa) | kg/cm²(MPa)[Lb/in²] |
Tensile Modulus | 23℃ | ISO 527-2 | 3000 | Mpa |
Tensile Modulus | | ISO527-2 | 2750 | Mpa |
Tensile Elongation | Break | ASTMD638,ISO527-2 | 40 | % |
Flexural Modulus | | ASTMD790,ISO178 | 2600 | Mpa |
Flexural Strength | | ASTMD790 | 88.0 | Mpa |
Charpy Notched Impact Strength | | ISO 179 | 7.0 | kJ/m² |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.750 mm | UL 94 | HB | |
Specific Heat | | | 1470 | J/kg/°C |
Thermal Conductivity | | | 0.23 | W/m/K |
Burning Rate | | UL94 | HB | |
Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 158 | °C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 102 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 163 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 158 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 124 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 102 | °C |
Linear thermal expansion coefficient | MD | ASTMD696,ISO11359-2 | 1E-04 | cm/cm/°C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTMD785 | 88 | |
Rockwell Hardness | R-Scale | ASTMD785 | 117 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.75mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.