Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1390 | |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.8 | % |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 2.2 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | | ISO 62 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress(Yield) | 73℉ | ISO 527-1,-2 | 9140 | psi |
Tensile Strain(Yield) | 73℉ | ISO 527-1,-2 | 10 | % |
Tensile Creep Modulus | 1000h | ISO 899-1 | 189000 | psi |
Charpy Notched Impact Strength | -22℉ | ISO 179 | 2.62 | ft·lb/in2 |
Charpy Notched Impact Strength | 73℉ | ISO 179 | 2.86 | ft·lb/in2 |
Charpy Unnotched Impact Strength | -22℉ | ISO 179 | 85.7 | ft·lb/in2 |
Tensile Modulus | 73℉ | ISO 527-1,-2 | 377000 | psi |
Charpy impact strength | | ASTM D256/ISO 179 | 6 | kg·cm/cm(J/M)ft·lb/in |
Charpy impact strength | | ASTM D256/ISO 179 | 250 | kg·cm/cm(J/M)ft·lb/in |
Charpy impact strength | | ASTM D256/ISO 179 | 180 | kg·cm/cm(J/M)ft·lb/in |
Charpy impact strength | | ASTM D256/ISO 179 | 5.5 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | | 166 | ℃(℉) |
Linear expansion coefficient | | ASTM D696/ISO 11359 | 1.2 | mm/mm.℃ |
Flame retardancy | | UL94 | HB | |
Melting temperature | | | 374-446 | ℉ |
Melting temperature | | ISO 3146 | 331 | ℉ |
Heat Deflection Temperature | | | 140-212 | ℉ |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | 1E+13 | ohms |
Dielectric Constant | | ASTM D150/IEC 60250 | 3.8 | |
Volume Resistivity | | IEC 60093 | 1E+15 | ohm·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.