Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 34 | g/10min |
Modeling Shrinkage | MD | 内部方法 | 1.7到2.1 | % |
Moisture Absorption | 23°C,24hr,50%RH | ASTMD570 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber Abrasion Resistance | | ASTMD1044 | 13.0 | mg |
Tensile Modulus | | ISO527-2 | 3400 | Mpa |
Tensile Elongation | Break | ASTMD638,ISO527-2 | 20 | % |
Flexural Modulus | | ASTMD790,ISO178 | 3200 | Mpa |
Flexural Strength | | ASTMD790 | 111 | Mpa |
yield | | ISO527-2 | 73.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
0.45MPa, Unannealed | | ASTMD648 | 172 | °C |
0.45MPa, Unannealed | | ISO75-2/B | 165 | °C |
1.8MPa, Unannealed | | ASTMD648 | 136 | °C |
1.8MPa, Unannealed | | ISO75-2/A | 105 | °C |
Specific Heat | | | 1470 | J/kg/°C |
Thermal Conductivity | | | 0.23 | W/m/K |
Linear thermal expansion coefficient | MD | ASTMD696,ISO11359-2 | 1E-04 | cm/cm/°C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTMD785 | 94 | |
Rockwell Hardness | R-Scale | ASTMD785 | 120 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.750mm | UL94 | HB | |
UL flame retardant rating | 1.50mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.