Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD：3.00mm | | 1.6 | % |
| Melt Mass-Flow Rate | | ISO1133 | 5.0 | g/10min |
| Density / Specific Gravity | | ISO1183 | 1.56 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Nominal Tensile Strain at Break | 23°C | ISO527-2 | 5.6 | % |
| Flexural Modulus | 23°C | ISO178 | 5290 | Mpa |
| Tensile Stress | Yield,23°C | ISO527-2 | 67.0 | Mpa |
| Flexural Stress | 23°C | ISO178 | 112 | Mpa |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | IEC60243-1 | 21 | KV/mm |
| Surface Resistivity | | IEC60093 | 1E+16 | ohms |
| Volume Resistivity | | IEC60093 | 1E+14 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 3.8 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
