Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.41 | |
Modeling Shrinkage | | ASTM D955 | 2.0 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 2.0 | % |
Moisture Absorption | Equilibrium,23°C,60%RH | ASTMD570 | 0.22 | % |
Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 11 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | 23°C | ASTMD638 | 62.0 | Mpa |
Tensile Strength | | ASTM D638/ISO 527 | 630 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | Break,23°C | ASTMD638 | 40 | % |
Flexural Modulus | 23°C | ASTMD790 | 2400 | Mpa |
Flexural Modulus | | ASTM D790/ISO 178 | 24500 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | | ASTM D790/ISO 178 | 870 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | 23°C | ASTMD790 | 84.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | | UL94 | HB | |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648A | 158 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648A | 110 | °C |
Melting Temperature | | | 166 | ℃(℉) |
Linear expansion coefficient | | ASTM D696/ISO 11359 | 13 | mm/mm.℃ |
Linear thermal expansion coefficient | MD | ASTMD696 | 1.3E-04 | cm/cm/°C |
Melting temperature | | ASTMD1525 | 166 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | ASTMD149 | 19 | KV/mm |
Dissipation Factor? | 1MHz | ASTMD150 | 0.060 | |
Surface Resistivity | | ASTMD257 | 1E+13 | ohms |
Dielectric Constant | | ASTMD150 | 3.70 | |
Volume Resistivity | | ASTMD257 | 1E+11 | ohms·cm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTMD785 | 80 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.