Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.39 | |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 9.5 | g/10min |
Modeling Shrinkage | MD:3.00mm | 内部方法 | 2.0 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | | ISO527-2 | 60.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 10 | % |
Tensile Strain | Break | ISO527-2 | 26 | % |
Flexural Modulus | | ASTM D790/ISO 178 | 355000 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | | ISO178 | 2450 | Mpa |
Flexural Strength | | ASTM D790/ISO 178 | 11700 | kg/cm²(MPa)[Lb/in²] |
Flexural Stress | | ISO178 | 81.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | ISO11357-3 | 165 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 95.0 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+16 | ohms |
Volume Resistivity | | IEC60093 | 1E+14 | ohms·cm |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.