Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 27 | g/10min |
Density | | ASTM D792/ISO 1183 | 1.41 | |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.22 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Friction | 相对钢材 | ASTM D-1894 | 0.15 | |
Coefficient of Friction | 同系Resin | ASTM D-1894 | 0.35 | |
Modeling Shrinkage | 垂直 | 东丽法 | 1.8 | % |
Modeling Shrinkage | Across Flow | 东丽法 | 1.9 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 有切口 | ASTM D-256 | 55 | J/m |
Notched Izod Impact Strength | 无切口 | ASTM D-256 | 640 | J/m |
Tensile Strength | | ASTM D-1822 | 100 | KJ/m |
Flexural Modulus | | ASTM D-790 | 2.70 | GPa |
Insulation strength | 3mmt | ASTM D-149 | 19 | MV/m |
Shearing Strength | | ASTM D-732 | 56 | Mpa |
Flexural Strength | | ASTM D-790 | 94 | Mpa |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 50 | % |
Tensile Strength | | ASTM D638/ISO 527 | 64 | kg/cm²(MPa)[Lb/in²] |
Tensile Strength | | ASTM D-638 | 64 | Mpa |
Tensile Elongation | Break | ASTM D-638 | 50 | % |
Rockwell Hardness | | ASTM D-785 | M82(R115) | |
Rockwell Hardness | | ASTM D785 | 82 | |
Flexural Modulus | | ASTM D790/ISO 178 | 2.70 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | | ASTM D790/ISO 178 | 94 | kg/cm²(MPa)[Lb/in²] |
Charpy impact strength | | ASTM D256/ISO 179 | 55 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.82MPa | ASTM D-648 | 110 | °C |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 110 | ℃(℉) |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 158 | ℃(℉) |
Deflection Temperature Under Load? | 0.45MPa | ASTM D-648 | 158 | °C |
Melting Temperature | | DSC | 166 | °C |
Linear expansion coefficient | | ASTM D696/ISO 11359 | 10 | mm/mm.℃ |
Coefficient of Linear Thermal Expansion | | ASTM D-696 | 10 | |
Flammability | | UL 94 | HB | |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC(CTI) | 600 | V |
Dissipation Factor? | 10 | ASTM D-150 | 0.005 | |
Dissipation Factor? | 50Hz | ASTM D-150 | 0.005 | |
Dielectric Constant | 50Hz | ASTM D-150 | 3.7 | |
Dielectric Constant | 10 | ASTM D-150 | 3.7 | |
Arc Resistance | | ASTM D-495 | >200 | sec |
Volume Resistivity | 10 | ASTM D-257 | 4 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | 190℃ | ASTM D-1238 | 27 | g/10min |
Moisture Absorption | | ASTM D-570 | 0.22 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.