Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 0.918 | |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 0.5 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation?(Break) | MD | ASTM D-882 | 700 | % |
| Tensile Elongation?(Break) | TD | ASTM D-882 | 850 | % |
| Tensile Strength | | ASTM D638/ISO 527 | 43 | kg/cm²(MPa)[Lb/in²] |
| Tensile Elongation | | ASTM D638/ISO 527 | 700 | % |
| Tensile Strength(Yield) | MD | ASTM D-882 | 13 | Mpa |
| Tensile Strength(Yield) | TD | ASTM D-882 | 11 | Mpa |
| Tensile Strength(Break) | MD | ASTM D-882 | 43 | Mpa |
| Tensile Strength(Break) | TD | ASTM D-882 | 32 | Mpa |
| Instrumented Dart Impact | F50 | ASTM D-1709 | 200 | g |
| Flexural Modulus - 1% Secant | MD | ASTM D-882 | 220 | Mpa |
| Flexural Modulus - 1% Secant | TD | ASTM D-882 | 260 | Mpa |
| Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 850 | % |
| Izod notch impact strength | | ASTM D256/ISO 179 | 200 | kg·cm/cm(J/M)ft·lb/in |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Gloss | 60° | ASTM D-2457 | 87 | |
| Haze | | ASTM D-1003 | 10 | % |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | | ASTM D-1238 | 0.5 | g/10min |
| Density | | ASTM D-792 | 0.918 | g/cm³ |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Film Puncture Force | | SABIC method | 89 | J/mm |
| Elmendorf Tear Strength | MD | ASTM D-1922 | 135 | g |
| Elmendorf Tear Strength | TD | ASTM D-1922 | 400 | g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
