Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tearing Strength | MD | ASTM D-1922 | 831 | g |
Tearing Strength | TD | ASTM D-1922 | 1106 | g |
Tensile Strength(Yield) | MD | ASTM D-882 | 8 | Mpa |
Tensile Strength(Yield) | TD | ASTM D-882 | 8 | Mpa |
Tensile Strength (Break) | MD | ASTM D-882 | 52 | Mpa |
Tensile Strength (Break) | TD | ASTM D-882 | 46 | Mpa |
Dart Drop Impact | | ASTM D-1709 | >850 | g |
Film Puncture Force | | DOW法 | 20 | J/cm³ |
Tensile Elongation | MD | ASTM D-882 | 646 | % |
Tensile Elongation | TD | ASTM D-882 | 735 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Peak Melting Temperature | | DOW法 | 84 | °C |
Melting Temperature | | DOW法 | 123 | °C |
Vicat Softening Temperature | | ASTM D-1525 | 84 | °C |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Gloss | | ASTM D-2457 | 54 | |
Haze | | ASTM D-1003 | 6 | % |
Transmittance | | ASTMD -1746 | 85 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTM D-1238 | 0.80 | g/10min |
Density | | ASTM D-792 | 0.9050 | g/cm³ |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
toughness | MD | ASTM D-882 | 93 | J/cm³ |
toughness | TD | ASTM D-882 | 107 | J/cm³ |
Oxygen Transmission Rate | | ASTM D-3985 | 928 | cc-mil |
Water Vapor Transmission Rate | | ASTM F-1249 | 1.58 | g-mil |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.