Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 0.917 | |
Modeling Shrinkage | | ASTM D955 | 3.0 | % |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.002 | % |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 50 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTMD1238 | 50 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength(Break) | | D-638 | 95 | kg/cm |
Tensile Strength | Break | ASTMD638 | 9.32 | Mpa |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 500 | % |
Tensile Strength | | ASTM D638/ISO 527 | 95 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | | ASTM D638/ISO 527 | 500 | % |
Tensile Elongation | | D-638 | 500 | % |
Tensile Elongation | Break | ASTMD638 | 500 | % |
Rockwell Hardness | | ASTM D785 | 65 | |
Flexural Strength | | D-747 | 1800 | kg/cm |
Flexural Modulus | | ASTMD747 | 157 | Mpa |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 480 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 78 | ℃(℉) |
Melting temperature | | | 105 | °C |
Processing | Test Condition | Test Method | Test Result | Unit |
---|
Processing temperature | | | 230 | °C |
Processing temperature | | | 210 | °C |
Processing temperature | | | 220 | °C |
Processing temperature | | | 190 | °C |
Screw Speed | | | 2800 | rpm |
Melt Temperature | | | 106 | °C |
Mold Temperature | | | 70 | °C |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | | D-1505 | 0.917 | g/cm |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | | D-1238 | 50 | g/10min |
Melting Temperature | | TPC | 106 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.