Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Environmental Stress Cracking Resistance | 50°C,100%Igepal,F50 | ASTMD1693 | 50.0 | hr |
Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 0.25 | g/10min |
Melt Mass-Flow Rate | 190°C/21.6kg | ASTMD1238 | 23 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength(Break) | | ASTM D-638 | 25.5 | Mpa |
Flexural Modulus (2% Secant) | | ASTMD790B | 1020 | Mpa |
Flexural Modulus (2% Secant) | | ASTM D-790B | 1020 | Mpa |
Shore Hardness | Shore D | ASTM D-2240 | 59 | |
Tensile Elongation?(Yield) | | ASTM D-638 | 6 | % |
Environmental Stress Cracking Resistance | 50℃,10% Igepal,F50 | ASTM D-1693 | 50 | hr |
Tensile Strength | | ASTM D-1822 | 210 | KJ/m |
Tensile Strength(Yield) | | ASTM D-638 | 26.2 | Mpa |
Tensile Elongation?(Break) | | ASTM D-638 | 900 | % |
Tensile Elongation | Yield | ASTMD638 | 6.0 | % |
Tensile Elongation | Break | ASTMD638 | 900 | % |
Tensile Strength | Yield | ASTMD638 | 26.2 | Mpa |
Tensile Strength | Break | ASTMD638 | 25.5 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ASTMD1525 | 129 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 70.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTM D-648 | 70 | °C |
Vicat Softening Temperature | | ASTM D-1525 | 129 | °C |
Brittleness Temperature | | ASTM D-746 | | °C |
Brittleness Temperature | | ASTMD746 | <-76.1 | °C |
Melting temperature (DSC) | | 内部方法 | 132 | °C |
Melting temperature | | Internal Method | 132 | °C |
Peak Crystallization Temperature | | Internal Method | 119 | °C |
Peak Crystallization Temperature? | DSC | 内部方法 | 119 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Impact Strength | | ASTMD1822 | 210 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D | ASTMD2240 | 59 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | 190℃/2.16kg | ASTM D-1238 | 0.25 | g/10min |
Melt index | 190℃/21.6kg | ASTM D-1238 | 23 | g/10min |
Density | | ASTM D-792 | 0.953 | g/cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.