HDPE SABIC® B5429 SABIC SAUDI
54
- Unit Price:
- $1470 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 118MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 0.30 | g/10min |
| 190°C/21.6kg | ISO1133 | 29 | g/10min | |
| 190°C/5.0kg | ISO1133 | 1.5 | g/10min | |
| Environmental Stress Cracking Resistance | 10%IgepalCO-630,Compression Molded,F50 | ASTMD1693B | 40.0 | hr |
| Density / Specific Gravity | ISO1183 | 0.954 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Modulus | 2.00mm,Compression Molded | ISO527-2/1BA/50 | 1050 | Mpa |
| Flexural Modulus | 2.00mm,Compression Molded | ISO178 | 1250 | Mpa |
| Tensile Stress | Yield,2.00mm,Compression Molded | ISO527-2/1BA/50 | 26.0 | Mpa |
| Break,2.00mm,Compression Molded | ISO527-2/1BA/50 | 28.0 | Mpa | |
| Tensile Strain | Break,2.00mm,Compression Molded | ISO527-2/1BA/50 | >1000 | % |
| Flexural Stress | 2.00mm,Compression Molded | ISO178 | 27.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melting temperature | DIN53765 | 132 | °C | |
| Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 81.0 | °C |
| Vicat Softening Temperature | ASTMD15252 | 127 | °C | |
| EnthalpyChange | DIN53765 | 205 | J/g |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Notched Izod Impact Strength | -30°C,Compression Molded | ISO180/A | 5.0 | kJ/m² |
| 23°C,Compression Molded | ISO180/A | 12 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shore Hardness | Shore D,Compression Molded | ISO868 | 61 |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| BlowMoldingMeltTemperature | 165到215 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.