Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.16 | |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 1.8 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | 230℃/3.8 kg | ASTM D1238 | 1.8 | g/10 min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield, 3.18 mm | ASTM D638 | 70.3 | Mpa |
Notched Izod Impact Strength | 23℃, 6.35 mm | ASTM D256 | 20 | J/m |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 5.0 | % |
Tensile Strength | | ASTM D638/ISO 527 | 70.3 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | Break, 3.18 mm | ASTM D638 | 5.0 | % |
Rockwell Hardness | M -Sale, 6.35 mm | ASTM D785 | 95 | |
Rockwell Hardness | | ASTM D785 | 95 | |
Flexural Strength | | ASTM D790/ISO 178 | 108 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | 6.35 mm | ASTM D790 | 108 | Mpa |
Izod notch impact strength | | ASTM D256/ISO 179 | 20 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 100 | ℃(℉) |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed, 6.35 mm | ASTM D648 | 100 | °C |
Vicat Softening Temperature | | ASTM D1525/ISO R306 | 113 | ℃(℉) |
Vicat Softening Temperature | | ASTM D1525 | 113 | °C |
Flame Rating | 1.59 mm | UL 94 | HB | |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Transmittance | 3180 µm | ASTM D1003 | 91.0 | % |
Haze | 3.18 µm | ASTM D1003 | < 1.0 | % |
The Yellow Index | 3.18 mm | ASTM D1003 | 0.50 到 1.0 | YI |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Transmittance | | ASTM D1003/ISO 13468 | 91.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.