Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO 527-2/1 | 8500 | Mpa |
Tensile Stress | Break | ISO 527-2/5 | 130 | Mpa |
Tensile Strain | Break | ISO 527-2/5 | 2.5 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ISO 306/B50 | 250 | °C |
Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 255 | °C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 245 | °C |
Melting temperature | | ISO 11357-3 | 262 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | 1.0E+13 | ohms |
Volume Resistivity | | IEC 60093 | 1.0E+15 | ohms·cm |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Temperature | | | 75 到 85 | °C |
Processing (Melt) Temp | | | 270 到 290 | °C |
Mold Temperature | | | 90 到 110 | °C |
Drying Time | | | 2.0 到 4.0 | hr |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | 23°C | ISO 179/1eU | 35 | kJ/m² |
Notched Izod impact strength | 23°C | ISO 180/1U | 30 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | | FMVSS 302 | < 100 | mm/min |
Flame Rating | 0.8 mm | UL 94 | HB | |
ISO Shortname | | ISO 1874 | PA6,M,14-080,GF30 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.