Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Across Flow : 3.00 mm | 内部方法 | 0.90 | % |
Modeling Shrinkage | 流量 : 3.00 mm | 内部方法 | 0.30 | % |
Moisture Absorption | Equilibrium, 23°C, 50% RH | | 2.0 | % |
PV Limit - vs. S45C | | Suzuki Method | 2.3 | MPa·m/s |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Amount of Wear - vs. S45C 4 | | Suzuki Method | 0.700 | mg/hr |
Coefficient of Friction (vs.S45C) | | Suzuki Method | 0.32 | |
Tensile Stress | 23°C | ISO 527-2 | 223 | Mpa |
Tensile Strain | Break, 23°C | ISO 527-2 | 2.1 | % |
Flexural Modulus | 23°C | ISO 178 | 13800 | Mpa |
Flexural Stress | 23°C | ISO 178 | 310 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 250 | °C |
Melting temperature | | DSC | 265 | °C |
Coefficient of Linear Thermal Expansion (Flow) | | ISO 11359-2 | 2.4E-5 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC 60093 | 0.020 | ohms·cm |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL 94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.