Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | 内部方法 | 0.70 | % |
| Modeling Shrinkage | MD | 内部方法 | 0.30 | % |
| Modeling Shrinkage | 吸水率(Saturation,23°C) | 内部方法 | -- | % |
| Modeling Shrinkage | 干 | 旭化成方法 | 0.3/0.7 | % |
| Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | -- | % |
| Taber Abrasion Resistance | 湿 | ASTM D-1044 | 19 | ×10-6kg/1000times |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Modulus | 干(湿) | ASTM D-790 | 11.8(8.3) | GPa |
| Notched Izod Impact Strength | 干(湿) | ASTM D-256 | 127(206) | J/m |
| Tensile Stress | Break,23°C | ISO527-2 | 207 | Mpa |
| Tensile Strain | Break,23°C | ISO527-2 | 3.0 | % |
| Tensile Strength | | ASTMD638 | 196 | Mpa |
| Flexural Stress | 23°C | ISO178 | 303 | Mpa |
| Taber Abrasion Resistance | 1000Cycles | ASTMD1044 | -- | mg |
| Tensile Strength | 干(湿) | ASTM D-790 | 314(235) | Mpa |
| Elongation at break | 干(湿) | ASTM D-638 | 3(4) | % |
| Tensile Modulus | 23°C | ISO527-2 | 12700 | Mpa |
| Tensile Strength | 干(湿) | ASTM D-638 | 196(157) | Mpa |
| Tensile Elongation | Break | ASTMD638 | 3.0 | % |
| Rockwell Hardness | 干(湿) | ASTM D-785 | 96(80) | M Scale |
| Rockwell Hardness | 干(湿) | ASTM D-785 | 118(-) | R scale |
| Flexural Modulus | | ASTMD790 | 11800 | Mpa |
| Flexural Modulus | 23°C | ISO178 | 11700 | Mpa |
| Flexural Strength | | ASTMD790 | 314 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 260 | °C |
| Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 260 | °C |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 250 | °C |
| Deflection Temperature Under Load? | 0.46MPa,干 | ASTM D-648 | 260 | °C |
| Deflection Temperature Under Load? | 1.82MPa,干 | ASTM D-648 | 250 | °C |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 255 | °C |
| Linear expansion coefficient | 干 | ASTM D-696 | 3 | ×10-5/K |
| Thermal Conductivity | 干 | | 0.4 | W/(m.K) |
| Linear thermal expansion coefficient | MD | ASTMD696 | 3E-05 | cm/cm/°C |
| Flame retardancy | 干 | UL 94 | HB | |
| Thermal Conductivity | | | 0.40 | W/m/K |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | ASTMD149 | 30 | KV/mm |
| Dielectric Strength | | IEC60243-1 | 30 | KV/mm |
| Comparative Tracking Index | 3.00mm | IEC60112 | 600 | V |
| Surface Resistivity | | ASTMD257 | 1E+15 | ohms |
| Surface Resistivity | | IEC60093 | 1E+15 | ohms |
| Volume Resistivity | | ASTMD257 | 1E+15 | ohms·cm |
| Volume Resistivity | 23°C | IEC60093 | 1E+15 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | | ISO179 | 84 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | M-Sale | ASTMD785 | 96 | |
| Rockwell Hardness | R-Sale | ASTMD785 | 118 | |
| Rockwell Hardness | M-Sale | ISO2039-2 | 96 | |
| Rockwell Hardness | R-Sale | ISO2039-2 | 118 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 0.75mm | UL94 | HB | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 湿 | | 1.4 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
