Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | % | 1.0 | -- |
| Modeling Shrinkage | MD | % | 0.30 | -- |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | Break | MPa | 145 | |
| Tensile Strain | Break | % | 2.1 | 1.9 |
| Tensile Modulus | | MPa | 10700 | 11300 |
| Flexural Modulus | | MPa | 9800 | 10800 |
| Flexural Stress | | MPa | 225 | |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | °C | 281 | -- |
| RTIElec | 0.400mm | °C | 140 | -- |
| RTIElec | 0.750mm | °C | 140 | -- |
| RTIElec | 1.50mm | °C | 140 | -- |
| RTIElec | 3.00mm | °C | 140 | -- |
| Linear thermal expansion coefficient | MD | cm/cm/°C | 1.8E-05 | -- |
| Linear thermal expansion coefficient | MD:-40to23°C | cm/cm/°C | 1.8E-05 | -- |
| Linear thermal expansion coefficient | MD:55to160°C | cm/cm/°C | 1.2E-05 | -- |
| Linear thermal expansion coefficient | TD | cm/cm/°C | 6.2E-05 | -- |
| Linear thermal expansion coefficient | TD:-40to23°C | cm/cm/°C | 6E-05 | -- |
| Linear thermal expansion coefficient | TD:55to160°C | cm/cm/°C | 9.5E-05 | -- |
| Melting Temperature | | °C | 310 | -- |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Comparative Tracking Index | | V | 600 | -- |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | -30°C | kJ/m² | 40 | |
| Charpy Unnotched Impact Strength | 23°C | kJ/m² | 45 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Glow Wire Flammability Index | 0.400mm | °C | 960 | -- |
| Glow Wire Flammability Index | 3.00mm | °C | 960 | -- |
| Oxygen Index | | % | 37 | -- |
| Glow Wire Ignition Temperature | 0.400mm | °C | 700 | -- |
| Glow Wire Ignition Temperature | 3.00mm | °C | 775 | -- |
| Flammability level | 0.400mm | | V-0 | -- |
| Flammability level | 1.50mm | | V-0 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
