Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.19 | |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 1.1 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD:3.00mm2 | % | 1.0到1.4 | -- |
Modeling Shrinkage | MD:3.00mm3 | % | 0.70到1.0 | -- |
Moisture Absorption | 23°C,24hr | % | 0.60 | -- |
Moisture Absorption | Saturation,23°C | % | 5.1 | -- |
Moisture Absorption | -,23℃,24hrs | D570 | 0.6 | % |
Moisture Absorption | -,23℃,水中 | D570 | 5.1 | % |
Filler Content | | | 40 | wt% |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | -40°C | MPa | 120 | -- |
Tensile Stress | 23°C | MPa | 95.0 | 70.0 |
Tensile Stress | 80°C | MPa | 40.0 | -- |
Tensile Strain | Break,-40°C | % | 3.0 | -- |
Tensile Strain | Break,23°C | % | 3.5 | 5.0 |
Tensile Strain | Break,80°C | % | 5.0 | -- |
Impact Strength | 23℃ | D256 | 45 | J/m |
Tensile Strength(Yield) | -,-40℃ | D638 | 120 | Mpa |
Tensile Strength(Yield) | -,23℃ | D638 | 95 | Mpa |
Tensile Strength(Yield) | -,80℃ | D638 | 40 | Mpa |
Flexural Stress | -40°C | MPa | 185 | -- |
Flexural Stress | 23°C | MPa | 155 | |
Flexural Stress | 80°C | MPa | 65.0 | -- |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 12 | % |
Tensile Elongation?(Break) | -,-40℃ | D638 | 5.0 | % |
Tensile Elongation?(Break) | -,23℃ | D638 | 6.0 | % |
Tensile Elongation?(Break) | -,80℃ | D638 | 8.5 | % |
Tensile Strength | | ASTM D638/ISO 527 | 85 | kg/cm²(MPa)[Lb/in²] |
Rockwell Hardness | | ASTM D785 | 120 | |
Flexural Modulus | | ASTM D790/ISO 178 | 3500 | kg·cm/cm(J/M)ft·lb/in |
Flexural Modulus | -,-40℃ | D790 | 6.4 | GPa |
Flexural Modulus | -,23℃ | D790 | 6.0 | GPa |
Flexural Modulus | -,80℃ | D790 | 2.1 | GPa |
Flexural Modulus | -40°C | MPa | 6200 | -- |
Flexural Modulus | 23°C | MPa | 5800 | 3000 |
Flexural Modulus | 80°C | MPa | 2000 | -- |
Flexural Strength | | ASTM D790/ISO 178 | 125 | kg·cm/cm(J/M)ft·lb/in |
Flexural Strength | -,-40℃ | D790 | 180 | Mpa |
Flexural Strength | -,23℃ | D790 | 150 | Mpa |
Flexural Strength | -,80℃ | D790 | 60 | Mpa |
Izod notch impact strength | | ASTM D256/ISO 179 | 45 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | | UL94 | HB | |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 224 | ℃(℉) |
Deflection Temperature Under Load? | -,0.46Mpa | D648 | 243 | °C |
Deflection Temperature Under Load? | -,1.86MPa | D648 | 185 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | °C | 243 | -- |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | °C | 185 | -- |
Melting Temperature | | | 265 | ℃(℉) |
Melting Temperature | | DSC | 265 | °C |
Melting temperature | | °C | 265 | -- |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTM D257/IEC 60093 | 10^13 | Ω.cm |
Processing | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | 3mmt | | 1.0-1.4 | % |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Sale,23°C | | 83 | -- |
Rockwell Hardness | R-Sale,23°C | | 120 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.