Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.48 | |
| Modeling Shrinkage | | ASTM D955 | 0.5-1.3 | % |
| Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 1.5 | % |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 干 | 旭化成方法 | 0.5-1.3 | % |
| Moisture Absorption | Saturation, 23°C | | -- | % |
| Moisture Absorption | Equilibrium, 23°C, 50% RH | ISO 62 | -- | % |
| Taber Abrasion Resistance | 湿 | ASTM D-1044 | 8 | ×10-6kg/1000times |
| Modeling Shrinkage (Flow) | | 内部方法 | 0.50 到 1.3 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Modulus | 干(湿) | ASTM D-790 | 5.9(2.9) | GPa |
| Taber Abrasion Resistance | 1000 Cycles | ASTM D1044 | -- | mg |
| Tensile Strength | 干(湿) | ASTM D-790 | 147(93) | Mpa |
| Elongation at break | 干(湿) | ASTM D-638 | 3(3.5) | % |
| Notched Izod Impact Strength | 干(湿) | ASTM D-256 | 34(39) | J/m |
| Tensile Stress | Break, 23°C | ISO 527-2 | 85.0 | Mpa |
| Tensile Stress | -- | ASTM D638 | 88.0 | Mpa |
| Tensile Modulus | 23°C | ISO 527-2 | 7000 | Mpa |
| Tensile Strength | 干(湿) | ASTM D-638 | 88(64) | Mpa |
| Tensile Elongation | Break | ASTM D638 | 3.0 | % |
| Tensile Elongation | Break, 23°C | ISO 527-2 | 2.0 | % |
| Rockwell Hardness | 干(湿) | ASTM D-785 | 85(-) | M Scale |
| Rockwell Hardness | | ASTM D785 | M85 | |
| Flexural Modulus | | ASTM D790/ISO 178 | 5880(MPa) | kg·cm/cm(J/M)ft·lb/in |
| Flexural Modulus | -- | ASTM D790 | 5900 | Mpa |
| Flexural Modulus | 23°C | ISO 178 | 7400 | Mpa |
| Flexural Strength | -- | ASTM D790 | 147 | Mpa |
| Flexural Strength | 23°C | ISO 178 | 140 | Mpa |
| Flexural Strength | | ASTM D790/ISO 178 | 147(MPa) | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Burning Rate | | UL94 | HB | |
| Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 191 | ℃（℉） |
| Deflection Temperature Under Load? | 1.82MPa,干 | ASTM D-648 | 191(250) | °C |
| Linear expansion coefficient | 干 | ASTM D-696 | 4 | ×10-5/K |
| Linear expansion coefficient | | ASTM D696/ISO 11359 | 4 | mm/mm.℃ |
| Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ASTM D648 | 250 | °C |
| Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 249 | °C |
| Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ASTM D648 | 191 | °C |
| Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 188 | °C |
| Coefficient of Linear Thermal Expansion (Flow) | | ASTM D696 | 4.0E-5 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Arc Resistance | | ASTM D495/IEC 60112 | 150 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | | ISO 179 | 51 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | M-Scale | ASTM D785 | 85 | |
| Rockwell Hardness | M -Sale | ISO 2039-2 | 85 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 0.75 mm | UL 94 | HB | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 湿 | | 1.5 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
