Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD:23°C | ISO294-4 | 0.70 | % |
Modeling Shrinkage | MD:23°C | ISO294-4 | 0.20 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 1.9 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 5.0 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield,23°C | ISO527-2 | 200 | Mpa |
Tensile Strain | Break,23°C | ISO527-2 | 4.0 | % |
Tensile Modulus | 23°C | ISO527-2 | 9700 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 220 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 210 | °C |
Continuous Use Temperature | | IEC60216 | 100 | °C |
Ball PressureTest | 125°C | IEC60695-10-2 | 通过 | |
Ball PressureTest | 165°C | IEC60695-10-2 | 通过 | |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+13 | ohms |
Volume Resistivity | 23°C | IEC60093 | 1E+15 | ohms·cm |
Dielectric Strength | 2.00mm | IEC60243-1 | 18 | KV/mm |
Comparative Tracking Index | 3.20mm,SolutionA | IEC60112 | 600 | V |
Needle Flame Test | 2.00mm | IEC60695-11-5 | 通过 | |
Needle Flame Test | 1.00mm | IEC60695-11-5 | 通过 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 无断裂 | |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 无断裂 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.40mm,BK | UL94 | V-0 | |
UL flame retardant rating | 0.8mm | UL94 | V-0 | |
UL flame retardant rating | 1.6mm | UL94 | V-0 | |
UL flame retardant rating | 3.2mm | UL94 | V-0 | |
Glow Wire Flammability Index | 0.8mm | IEC60695-2-12 | 960 | °C |
Glow Wire Flammability Index | 3.2mm | IEC60695-2-12 | 960 | °C |
Oxygen Index | | ISO4589-2 | 32 | % |
Glow Wire Ignition Temperature | 0.8mm | IEC60695-2-13 | 775 | °C |
Glow Wire Ignition Temperature | 3.2mm | IEC60695-2-13 | 800 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.