Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 0.90 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.50 | % |
Melt Volume flow Rate | 275°C/5.0kg | ISO1133 | 15.0 | cm3/10min |
Spiral Flow | | 内部方法 | 100 | CM |
HumidityAbsorption-62%RH | 70°C | ISO1110 | 1.7 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-2/1 | 5200 | Mpa |
Tensile Stress | Break | ISO527-2/5 | 105 | Mpa |
Tensile Strain | Break | ISO527-2/5 | 3.3 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | DINEN11357-1 | 220 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 215 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 192 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 60 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 60 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.8mm | UL94 | HB | |
Glow Wire Flammability Index | 0.8mm | IEC60695-2-12 | 700 | °C |
Glow Wire Ignition Temperature | 0.8mm | IEC60695-2-13 | 725 | °C |
Burning Rate | 1.00mm | FMVSS302 | <100 | mm/min |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|
ReinforcementContent | | ISO1172 | 15 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.