Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.36 | |
| Modeling Shrinkage | | ASTM D955 | 0.3-0.5 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ASTM D638/ISO 527 | 9500 | kg/cm²(MPa)[Lb/in²] |
| Flexural Modulus | | ASTM D790/ISO 178 | 8500 | kg/cm²(MPa)[Lb/in²] |
| Flexural Strength | | ASTM D790/ISO 178 | 270 | kg/cm²(MPa)[Lb/in²] |
| Izod notch impact strength | | ASTM D256/ISO 179 | 80 | kg·cm/cm(J/M)ft·lb/in |
| Izod notch impact strength | | ASTM D256/ISO 179 | 15 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 200 | ℃（℉） |
| Melting Temperature | | | 221 | ℃（℉） |
| Vicat Softening Temperature | | ASTM D1525/ISO R306 | 215 | ℃（℉） |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | ASTM D257/IEC 60093 | 1013 | Ω |
| Volume Resistivity | | ASTM D257/IEC 60093 | 101⁵ | Ω.cm |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Temperature | | | 240-270 °C | °C |
| Mold Temperature | | | 90-100 °C | °C |
| Drying conditions | | | 75-85°C / 2-4h | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
