Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.18mm | | 0.90 | % |
Moisture Absorption | Saturation | ASTMD570 | 6.2 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 6.2 | % |
Moisture Absorption | Equilibrium,50%RH | ASTMD570 | 2.4 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 2.4 | % |
Density / Specific Gravity | | ASTMD792 | 1.36 | g/cm³ |
Density / Specific Gravity | | ISO1183 | 1.36 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break,23°C | ASTMD638 | 85.0 | Mpa |
Tensile Stress | Break,23°C | ISO527-2 | 85.0 | Mpa |
Tensile Strain | Break,23°C | ISO527-2 | 4.9 | % |
Tensile Modulus | 23°C | ISO527-2 | 3700 | Mpa |
Tensile Elongation | Break,23°C | ASTMD638 | 4.9 | % |
Flexural Modulus | 23°C | ISO178 | 3270 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 120 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 70.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 195 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 160 | °C |
Peak Melting Temperature | | ASTMD3418 | 220 | °C |
Melting temperature (DSC) | | ISO3146 | 220 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | 1.50mm | ASTMD257 | >1.0E+15 | ohms·cm |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO179 | 5.6 | kJ/m² |
Notched Izod Impact Strength | -40°C | ASTMD256 | 45 | J/m |
Notched Izod Impact Strength | 23°C | ASTMD256 | 64 | J/m |
Notched Izod Impact Strength | -40°C | ISO180 | 4.0 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180 | 5.5 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.